OUTLAW EAGLE MANUFACTURING Forum Index OUTLAW EAGLE MANUFACTURING
ALUMINUM BOAT FORUM
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

2014 CBF class rules

 
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE RACE FORUM
View previous topic :: View next topic  
Author Message
Dale



Joined: 10 Oct 2005
Posts: 173

PostPosted: Tue Dec 31, 2013 11:32 am    Post subject: 2014 CBF class rules Reply with quote

The Canadian Boating Federation – Western Zone/ Jet River



Unlimited Jet Class – 300 Series Recommended Numbers (U300)
• Hull any shape or material with a minimum length of 16 feet (4.88m)
• Unlimited engine restrictions or modifications, any exhaust c/w mufflers
• Jet Engines do not require mufflers
• Propulsion – jet drive
• Roll bar (well mounted & braced) chrome moly recommended


“A+” Jet Class – 200 Series Recommended Numbers (A200)
• Hull any shape or material with a minimum length of 16 feet (4.88m)
• Engine displacement shall not exceed 470 cubic inches (7700 cc)
• Superchargers, blowers & turbos are allowed at 1.8 x cubic inch ratio
• Oxygenated Fuel Allowed
• Exhaust - any exhaust c/w mufflers
• Propulsion – jet drive
• Roll bar (well mounted & braced) chrome moly recommended
• Or/AMS Spec Engine, 565 cu in, No Oxygenated Fuel
• Or/US BBFX Class (502 cu in)


“LSX” Jet Class – 200 series Recommended Numbers (LSX200)
• Hull any shape or material with a minimum length of 16 feet (4.88m)
• Stock Crate Engine shall be GM LSX 454 part #19244611(620 hp version)No mofications
• No overbore, no sleeves, no grinding, no cutting, no filing, no milling, no porting, no balancing or engine modifications, no valve seat modifications, untouched factory heads only.
• modified cooling systems allowed, air/water bleed ports, can be enlarged or added, with or without water pump.
• Any oil Pan(no dry sumps or vacuum pumps allowed)any valve covers, any ignition or distributor
• Any intake or fuel injection allowed, intake modifications allowed, Any carburetor(s) No Oxygenated Fuel Allowed
• Repaired engines must use GM parts pertaining to engine.
• Exhaust - Any exhaust system allowed c/w mufflers
• Propulsion - jet drive
• Roll bar (well mounted & braced) chrome moly recommended
• Or/Old B-Class 366 cu in Motors, Oxygenated Fuel Allowed




“CX” Jet Class – 100 or 200 Series Recommended Numbers (CX100 or CX200)
• Hull any shape or material with a minimum length of 16 feet (4.88m)
• Stock Crate Engine shall be GM LS3 Engines 376ci CT525
• GM #19259233/525 Fuel Inj., GM #19271821/525 Carb
• GM #19244549/480 Fuel Inj., GM #19171225/515 Carb
• Any carburetor, or fuel injection engines, normally aspirated only
• Stock crate intake manifold with no modifications
• Repaired engines must use GM parts pertaining to engine.
• any oil pan(no dry sumps or vacuum pumps allowed)any valve covers, any ignition or distributor
• No overbore, no sleeves, no grinding, no cutting, no filing, no milling, no porting, no balancing or engine modifications allowed, no valve seat modification, untouched factory heads only
• modified cooling systems allowed, air/water bleed ports, can be enlarged or added, with or without water pump.
• Exhaust – any exhaust system allowed c/w mufflers
• No Oxygenated Fuel Allowed
• Propulsion – jet drive
• Roll bar (well mounted & braced) chrome moly recommended


“FX” Jet Class – 01 to 99 Series Recommended Numbers (FX99)–Crate Motor Class
• Hull any shape or material with a minimum length of 13 feet (3.96) No Glass Windshields
• Engine – GM ZZ4 355 HP CRATE engine GM part number 24502609 c/w stock GM intake
• Repaired motors must use GM parts pertaining to engine.
• No sleeves, no milling, no roller rockers allowed, No porting, no polishing, no grinding, no cutting, no filing, no balancing, no port matching or modifications, no valve seat modifications, untouched factory heads only.
• any ignition system, Any oil pan(no dry sumps or vacuum pumps ), any valve covers
• Carburetor – 750 CFM maximum & 1” spacer thickness maximum 3 only 0.060 gaskets
• Exhaust – any exhaust system allowed c/w mufflers
• No Oxygenated Fuels Allowed
• Propulsion – jet drive
• Roll bar (well mounted & braced) chrome moly or aluminum
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE RACE FORUM All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group :: Spelling by SpellingCow.