OUTLAW EAGLE MANUFACTURING Forum Index OUTLAW EAGLE MANUFACTURING
ALUMINUM BOAT FORUM
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Fuel containers

 
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE GENERAL FORUM
View previous topic :: View next topic  
Author Message
jeffg



Joined: 13 Aug 2014
Posts: 28

PostPosted: Fri Nov 07, 2014 5:19 pm    Post subject: Fuel containers Reply with quote

Wondering what people are using for those long trips. I have a bunch of 5 gal jerry cans but wouldn't mine somethjng larger but still manageable for one person
Back to top
View user's profile Send private message
murr190



Joined: 26 Dec 2011
Posts: 23

PostPosted: Fri Nov 07, 2014 5:56 pm    Post subject: Reply with quote

15 gallon drums, used to buy my race fuel in them and just use a super siphon from crappy tire to fill the boat out of em.
_________________
1997 20FT Outlaw Nahanni SD309, SBC.
"NO PROPLEMS"
Back to top
View user's profile Send private message
REPO



Joined: 09 Sep 2011
Posts: 179

PostPosted: Fri Nov 07, 2014 8:46 pm    Post subject: Reply with quote

Our local car wash sells 15 and 30 gallon plastic barrels. These originally had soap in them. The 15's have a handle at the top. They work great and are lite when empty. The 15's can be loaded or unloaded full making them great for stashing if required.
Back to top
View user's profile Send private message
tuchodi51



Joined: 01 Aug 2006
Posts: 97
Location: fort st john

PostPosted: Sat Nov 08, 2014 6:21 pm    Post subject: Reply with quote

We use 10 gal lined barrels, got ours at the local Shell bulk plant
Back to top
View user's profile Send private message Send e-mail
Toddco



Joined: 30 Aug 2011
Posts: 23

PostPosted: Sat Nov 22, 2014 5:13 pm    Post subject: gas cans Reply with quote

I use the 115 litre plastic oil drums. I drill and tap the bung, insert a valve stem, then i plumb a fuel line into the drum in the other bung. I then use one of those $20.00 12 volt air compressors to move the gas. Never have to lift it that way. It will even lift gas from the ground into the boat. Beer drinking happens while i fuel up! I also have one for the 20 litre cans, instead of compressed air i just blow a puff of air into the vent hole, the gas then siphons.

1. always plumb in a shut off valve
2. find a spare bung for the hose side of the setup
3. you can buy spare plugs for gas cans at crappy tire.
4. use at least 5/8" fuel line--much faster.
Back to top
View user's profile Send private message
riverboater



Joined: 10 Dec 2009
Posts: 152
Location: Prince George

PostPosted: Sun Nov 23, 2014 2:01 pm    Post subject: Reply with quote

Be careful folks, plastic and fuel makes static electricity if it is not the correct stuff. More of a problem when you add heat and splash the fuel into the container. Soap and oil containers are not the right type of plastic, having worked in the petroleum industry it is spooky the first time you fill a tank, Top load with spigot, in the dark. it is a light show of electricity in the gas but it is under the surface so not an explosion issue as there is no air to make the magic three happen. (ignition, fuel, air) makes fire. That is why most tankers are now bottom loaded. And fuel tanks on cars and boats have the fuel caps grounded to the tank so the nozzle becomes grounded to the tank. That being said, Yes I have used lots of non spec containers before I knew better.
Back to top
View user's profile Send private message Send e-mail
Toddco



Joined: 30 Aug 2011
Posts: 23

PostPosted: Wed Nov 26, 2014 5:50 am    Post subject: fuel Reply with quote

So.......how does one determine what plastic is ok for fuel use?
Back to top
View user's profile Send private message
DIGGINSWEATINSWEARIN



Joined: 02 Nov 2010
Posts: 47
Location: Deroche B.C.

PostPosted: Wed Nov 26, 2014 6:56 pm    Post subject: Reply with quote

HDPE ( high density polyethylene)
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE GENERAL FORUM All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group :: Spelling by SpellingCow.