OUTLAW EAGLE MANUFACTURING Forum Index OUTLAW EAGLE MANUFACTURING
ALUMINUM BOAT FORUM
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

ss Impeller rattle at idle

 
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE GENERAL FORUM
View previous topic :: View next topic  
Author Message
Velcro



Joined: 05 Dec 2010
Posts: 23
Location: St-Hubert

PostPosted: Sat Sep 10, 2011 6:40 am    Post subject: ss Impeller rattle at idle Reply with quote

Is there a fix for the SS impeller rattle when engine is idling, and if so, what is the best way to fix it.

Pump is an A/T sd309
Back to top
View user's profile Send private message
Will R



Joined: 31 Jul 2005
Posts: 677
Location: NWT/Alberta

PostPosted: Sat Sep 10, 2011 11:44 am    Post subject: Reply with quote

yup...put your foot in er!!!!
_________________
When in doubt hammer down!
Back to top
View user's profile Send private message
shallowman



Joined: 03 Apr 2006
Posts: 199

PostPosted: Sat Sep 10, 2011 12:39 pm    Post subject: rattle Reply with quote

the only way is to put in a flywheel not a flex plate and that will help alot
as it is not the stainless impeller that is rattling it is the spline at the pump off the drive shaft , . believe it or not , its true , as the impeller and shaft are heavier then the counter balance of your flex plate ,

good luck
Back to top
View user's profile Send private message
Akgravelpumper



Joined: 26 Apr 2006
Posts: 22

PostPosted: Sat Sep 10, 2011 1:03 pm    Post subject: Reply with quote

The issue is Torsional vibration, a heavier flywheel changes the rpm were the harmonics occur, changing idle timing a few degrees will move the rpm up or down a little. A Torsional damper of some sort in the driveline will also solve the problem, but $$$$
Back to top
View user's profile Send private message
coho dr.



Joined: 27 Jun 2010
Posts: 18
Location: Mission B.C.

PostPosted: Wed Sep 14, 2011 10:50 am    Post subject: Reply with quote

My SD312 rattled also with the stainless impeller. I would just leave it alone or you could upgrade to the SD191AF kit. Call Ron at American Turbine he will answer all your Questions
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE GENERAL FORUM All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group :: Spelling by SpellingCow.